 |
Tripod Clamp Base 11cm 5Pack
Cast metal, hammertone painted, economy bases. Base size equals length from centre to ...
 |
|
 |
Mild Steel Rods 1000 x 12.5mm
Plated mild steel, to fit bases B8A82004 et seq. Screwed 10 x 1.5mm metric thread.
|
|
 |
Clamp, Diecast Jaws
Rubber-lined diecast jaws, with clamping tommy-bar screw-through swivels, mounted on a ...
|
|
 |
Bosshead For Laboratory Stand Cast Alloy
Cast alloy boss with two slots at right angles to take rods up to 16mm diameter. ...
|
|
 |
Large Tripod Base Spread
Spread of 132mm from centre. Height: 42mm. Mass: 2.06kg.
|
|
 |
Rods 91cm
Metal rods to fit the above bases. 13mm (1/2and#8221;) diameter with narrower 9.5mm ...
|
|
|
Spring Loaded Clamp
Made from nickel plated diecast aluminium alloy, with spring loaded, chemical resistant ...
|
|
|
Clamp,Pressed Steel, Spring Loaded.
Pressed steel, for tubes up to 48mm diameter, with rubber on jaws. Spring-loaded ...
|
|
 |
15 x 10cm Two Position Base 5Pack
These economy bases come with two threaded holes to enable insertion of a support rod on ...
|
|
|
Univeral Clamp, Cork Lined
Cork lined jaws, which accept articles up to 100mm in diameter.
|
|
|
Beaker Clamp
One set of jaws is fixed the other pivots for accurate alignment. The jaws will accept ...
|
|
|
Retort Stand Base,Size 315 X 200Mm
Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of one short side. ...
|
|
 |
Rectangular Support Bases 22 x 15cm 5Pack
Heavy, molded, cast iron economy bases. Hammertone-painted. Base is drilled to accept ...
|
|
|
Mild Steel Rods 500 x 10mm
Plated mild steel, to fit bases B8A82004 et seq. Screwed 10 x 1.5mm metric thread.
|
|
|
22 x 15cm Two Position Base 5Pack
These economy bases come with two threaded holes to enable insertion of a support rod on ...
|
|
 |
Ring, Mild Steel, 75mm Inside Dimension
With welded joints, stem diameter 8mm, length 140mm.
|
|
|
Retort Stand Base,Size 250 X 160Mm
Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of one short side. ...
|
|
|
Rectangular Support Bases 15 x 10cm 5Pack
Heavy, molded, cast iron economy bases. Hammertone-painted. Base is drilled to accept ...
|
|
 |
Laboratory Jack
Strong, stable support for laboratory equipment. The jacks have screw-operated ...
|
|
|
Retort Stand Base,Size 200 X 125Mm
Steel base with tapped hole, (10 x 1.5mm metric thread) in the centre of one short side. ...
|
|
